Matching transmitter(s) to your vehicle – Cadillac 2006 STS User Manual

Page 77

Advertising
background image

Matching Transmitter(s) to
Your Vehicle

Each Keyless Access System is coded to allow only
transmitters programmed to your vehicle to work.
If a transmitter is lost or stolen, a replacement can be
purchased and programmed through your GM
dealer. Your GM dealer can reprogram your vehicle so
lost or stolen transmitters no longer work with your
vehicle. Each vehicle can have a maximum of
four transmitters matched to it.

To match a new transmitter to your vehicle when you
have a recognized transmitter, do the following.
Two recognized transmitters are required for
Canadian owners.

1. The vehicle must be off.

2. Have the recognized transmitter and the new,

unrecognized transmitter(s) with you.

3. Insert the vehicle key into the key lock cylinder

located on the outside of the driver’s door.

4. Turn the key to the unlock position five times within

five seconds.

5. The Driver Information Center (DIC) will display

READY FOR FOB #X, where X can be 2, 3 or 4.

6. Place the new, unrecognized transmitter into the

transmitter pocket with the transmitter buttons facing
the front of the vehicle. The transmitter pocket is
inside the center console storage area located
between the driver and front passenger seats.

7. Once the transmitter is programmed, a beep will

sound. The DIC will display READY FOR #X,
where X can be 3 or 4, or MAX # FOBS LEARNED.

8. Remove the transmitter from the transmitter pocket

and press the unlock button on the keyless access
transmitter two times.

2-7

Advertising