Cadillac 2004 SRX User Manual

Page 199

Advertising
background image

Remote Recall Memory/Recall Driving
Positions

If your vehicle has the optional memory package, you
will have this feature. When this feature is turned on, you
can recall any previously programmed seat, adjustable
pedals and mirror controls when the unlock button
on the remote keyless entry transmitter is pressed.

Programmable Modes

Mode 1: ON

Mode 2: OFF

Before your vehicle was shipped from the factory, it was
programmed to Mode 2. The mode to which the
vehicle was programmed may have been changed since
it left the factory. To program the vehicle to a different
mode, use one of the following procedures:

To change the mode using the Base audio system,
do the following:

1. Enter the personalization portion of the SETUP

menu following the instructions listed previously.

2. Scroll to REMOTE RECALL MEMORY to highlight it.

3. Press the TUNE/SEL knob to switch back and forth

between on and off.

When the mode is turned on, a check mark will
appear next to the feature name.

To change the mode using the Navigation system,
do the following:

1. Enter the Personalization menu by following the

instructions listed previously.

2. Scroll to REMOTE RECALL MEMORY and press

the ON or OFF button next to it as desired. If the
item is turned on the color of the ON button will be
light blue. If the item is turned off the color of the
OFF button will be light blue.

If REMOTE RECALL MEMORY is turned on, this
will also turn off REMOTE EXIT RECALL and
KEY IN RECALL MEMORY if they are not already
turned off.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

3-77

Advertising