Cadillac 2004 SRX User Manual

Page 214

Advertising
background image

Mirror to Curb in Reverse

If your vehicle has the optional memory package, you
will have this feature. When this feature is turned on, the
passenger’s outside rearview mirror will move
downward so you can view the curb when the shift lever
is shifted into REVERSE (R). The mirror will return to
the last known driving position when the shift lever
is moved out of REVERSE (R). See

Outside Curb View

Assist Mirror on page 2-38 for more information.

Programmable Modes

Mode 1: ON

Mode 2: OFF

Before your vehicle was shipped from the factory, it was
programmed to Mode 2. The mode to which the
vehicle was programmed may have been changed since
it left the factory. To program the vehicle to a different
mode, use one of the following procedures:

To change the mode using the Base audio system,
do the following:

1. Enter the personalization portion of the SETUP

menu following the instructions listed previously.

2. Scroll to MIRROR TO CURB IN REV using the

TUNE/SEL knob to highlight it.

3. Press the TUNE/SEL knob to switch back and forth

between on and off.

When the mode is turned on, a check mark will
appear next to the feature name.

To change the mode using the Navigation system,
do the following:

1. Enter the Personalization menu by following the

instructions listed previously.

2. Scroll to MIRROR TO CURB IN REVERSE and

press the ON or OFF button next to it as desired.
If the item is turned on the color of the ON
button will be light blue. If the item is turned off the
color of the OFF button will be light blue.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

3-92

Advertising