Champion Power Equipment 91050 - Manual (Page 25)

REV 91050-20140620
22
91050 ENGLISH
Chipper-Shredder Specifications
– Max Diameter Chipper Material 3 in. (7.6 cm)
– Max Diameter Shredder Material 0.5 in. (1.3 cm)
– Overall Dimensions
– Gross Weight 224.9 lb. (102 kg)
– Net Weight 189.6 lb. (86 kg)
– Height 49.4 in. (125.5 cm)
– Width 35 in. (89 cm)
– Length 35.1 in. (89.2 cm)
SPECIFICATIONS
Engine Specifications
– Model YF182F-000
– Displacement 338 cc
– Type 4-Stroke OHV
– Start Type Recoil
Spark Plugs
OEM spark plug: NHSP F6RTC
Replacement spark plug: NGK BPR6ES or equivalent
Make certain the spark plug gap is 0.7 - 0.8 mm or
(0.028 - 0.031 in.).
Oil
Use 10W-30 automotive oil.
Oil capacity is 1.2 qt. (1.1 L).
DO NOT OVERFILL.
Please reference the following chart for recommended
oil types for use in the chipper-shredder.
Fuel
Fuel capacity is 1.6 gallons (6.2 L). Use regular
unleaded gasoline with a minimum octane rating of 85
and an ethanol content of less than 10% by volume.
Maintenance Valve Clearance
– Intake: 0.13 – 0.17 mm (0.005 – 0.007 in.)
– Exhaust: 0.18 – 0.22 mm (0.007 – 0.009 in.)
Note: Tech bulletin regarding the valve adjustment
procedure is on www.championpowerequipment.com.
An Important Message About Temperature
Your Champion Power Equipment product is designed
and rated for continuous operation at ambient
temperatures up to 40°C (104°F). When your product is
needed your product may be operated at temperatures
ranging from -15°C (5°F) to 50°C (122°F) for short
periods. If the product is exposed to temperatures
outside this range during storage, it should be brought
back within this range before operation. In any event,
the product must always be operated outdoors, in a
well-ventilated area and away from doors, windows and
other vents.
Weather will affect engine oil and engine
performance. Change the type of engine oil used
based on weather conditions to suit the engine
needs.
NOTE