Security light, High-beam on light, Security light -23 high-beam on light -23 – CHEVROLET 2012 Traverse User Manual

Page 143

Advertising
background image

Black plate (23,1)

Chevrolet Traverse Owner Manual - 2012

Instruments and Controls

5-23

Notice: Lack of proper engine oil
maintenance can damage the
engine. The repairs would not be
covered by the vehicle warranty.
Always follow the maintenance
schedule for changing engine oil.

The oil pressure light should come
on briefly as the engine is started.
If it does not come on have the
vehicle serviced by your dealer.

If the light comes on and stays on, it
means that oil is not flowing through
the engine properly. The vehicle
could be low on oil and might have
some other system problem.

Security Light

The security light should come on
briefly as the engine is started. If the
system is working normally, the
indicator light turns off. If it does not
come on, have the vehicle serviced
by your dealer.

If the light stays on and the engine
does not start, there could be a
problem with the theft-deterrent
system.

This light is also used to indicate the
status of the anti-theft alarm system
when the ignition is turned off. The
light will flash rapidly if the alarm
system is arming and one or more
of the monitored entry points is not
closed. The light will stay on if the
alarm is arming and all entry points
are closed.

For information regarding this light
and the vehicle's security system,
see Anti-theft Alarm System on
page 2‑13
.

High-Beam On Light

The high-beam on light comes on
when the high-beam headlamps are
in use.

See Headlamp High/Low-Beam
Changer on page 6‑2
for more
information.

Advertising