Vehicle care 10-27 – CHEVROLET 2012 Traverse User Manual
Page 327
Black plate (27,1)
Chevrolet Traverse Owner Manual - 2012
Vehicle Care
10-27
To replace one of these bulbs:
1. Open the liftgate. See Liftgate
2. Remove the convenience net,
if the vehicle has one.
3. Remove the two taillamp nut
covers.
4. Remove the two nuts holding the
taillamp assembly in place.
5. Pull out the taillamp assembly.
6. Turn the bulb socket
counterclockwise and pull it
straight out to remove it from the
taillamp assembly.
7. Pull the old bulb straight out of
the bulb socket.
8. Push the new bulb straight into
the bulb socket until it connects.
9. Push the taillamp assembly back
into its original location.
When reinstalling the taillamp
assembly, make sure the pin on
the taillamp assembly lines up
and is inserted correctly into the
opening of the vehicle.
10. Reinstall the two nuts that hold
the taillamp assembly in place.
11. Reinstall the two taillamp nut
covers.