CHEVROLET 2012 Traverse - Manual (Page 365)

Black plate (65,1) Chevrolet Traverse Owner Manual - 2012
Vehicle Care 10-65
3. Remove the sealant and
compressor kit from its tray.
To store the tire sealant and
compressor kit, reverse the steps.
Tire Changing
Removing Tools
The tools needed to remove the
spare tire are located in the storage
compartment on the driver side, at
the rear of the vehicle.
1. Open the jack storage
compartment by pulling on the
latch tab, located toward the rear
of the vehicle, and pulling the
cover off.
A. Tool Bag
B. Wing Bolt
C. Jack
2. Remove the wing bolt (B) by
turning it counterclockwise.
3. Push the jack (C) up out of the
holding bracket and remove the
tool bag (A).
4. Turn the jack on its side, with the
bottom facing toward you.
5. Pull the jack straight out, bottom
first.
A. Jack
B. Wrench (Three-Piece Shown,
One-Piece Similar)
The tools you will be using include
the jack (A) and wrench (B).