Hazard warning flashers, Turn and lane-change signals, Hazard warning flashers on – CHEVROLET 2012 Suburban User Manual

Page 203: Hazard warning flashers -5 turn and lane-change, Signals -5

Advertising
background image

Black plate (5,1)

Chevrolet Tahoe/Suburban Owner Manual - 2012 - 2nd - 11/9/11

Lighting

6-5

To idle the vehicle with the
automatic headlamp system off, turn
the control to the off position.

The headlamps will also stay on
after you exit the vehicle. This
feature can be programmed using
the Driver Information Center (DIC).
See Vehicle Personalization (With
DIC Buttons) on page 5‑47
.

If the vehicle is not equipped with
DIC buttons, exit lighting is
automatic. When it is dark enough
outside, the exterior lamps remain
on for 30 seconds after the ignition
is moved from ON/RUN to
LOCK/OFF.

For vehicles without a radio, the
instrument panel light remains on for
30 seconds with the driver door
closed. For vehicles with a radio,
the instrument panel light remains
on for 10 minutes with the driver
door closed. See Retained
Accessory Power (RAP) on
page 9‑27
.

The regular headlamp system can
be turned on when needed.

Hazard Warning Flashers

|

(Hazard Warning Flashers):

Press this button located on top of
the steering column, to make the
front and rear turn signal lamps
flash on and off. This warns others
that you are having trouble. Press
again to turn the flashers off.

When the hazard warning flashers
are on, the vehicle's turn signals will
not work.

Turn and Lane-Change
Signals

An arrow on the instrument panel
cluster flashes in the direction of the
turn or lane change.

Move the lever all the way up or
down to signal a turn.

Advertising
This manual is related to the following products: