Auxiliary roof-mounted lamp, Interior lighting, Instrument panel illumination control – CHEVROLET 2012 Suburban User Manual

Page 205: Interior lighting -7, Ride, Auxiliary, Roof-mounted lamp -7, Instrument panel illumination, Control -7, Instrument panel illumination control d

Advertising
background image

Black plate (7,1)

Chevrolet Tahoe/Suburban Owner Manual - 2012 - 2nd - 11/9/11

Lighting

6-7

Auxiliary
Roof-Mounted Lamp

If the vehicle has this feature, this
button includes wiring provisions for
a dealer or a qualified service center
to install an auxiliary roof lamp.

This button is located on the
overhead console.

When the wiring is connected to an
auxiliary roof‐mounted lamp,
pressing the bottom of the button
will activate the lamp and illuminate
an indicator light at the bottom of
this button. Pressing the top of the
button will turn off the roof‐mounted
lamp and indicator.

The emergency roof lamp circuit is
fused at 30 amps, so the total
current draw of the attached lamps
should be less than this value. The
attachment points for the roof lamp
circuits are two blunt cut wires
located above the overhead
console, a dark green switched
power wire and a black ground wire.

For more information on roof mount
emergency lamp installation, please
visit the GM Upfitter website at
www.gmupfitter.com or contact your
dealer.

If the vehicle has this button, the
vehicle may have the snow plow
prep package. For further
information, see Adding a Snow
Plow or Similar Equipment on
page 9‑90
.

Interior Lighting

Instrument Panel
Illumination Control

D

(Instrument Panel

Brightness): This feature controls
the brightness of the instrument
panel lights and is located next to
the exterior lamps control.

Push the knob to extend out and
then it can be turned.

Turn the knob clockwise or
counterclockwise to brighten or dim
the instrument panel lights. Turning
the knob to the farthest clockwise
position turns on the dome lamps.

Advertising
This manual is related to the following products: