CHEVROLET 2012 Suburban - Manual (Page 411)

Black plate (39,1) Chevrolet Tahoe/Suburban Owner Manual - 2012 - 2nd - 11/9/11
Vehicle Care 10-39
License Plate Lamp
1. Remove the two screws holding
each of the license plate lamps
to the molding that is part of the
liftgate.
2. Twist and pull the license plate
lamp assembly forward through
the molding opening.
3. Remove the bulb socket from
the lamp assembly by turning it
counterclockwise.
4. Pull the bulb straight out of the
socket and install the new bulb.
5. Reverse Steps 1 through 3 to
reinstall the license plate lamp.
Replacement Bulbs
If the vehicle is a hybrid, see the
hybrid supplement for more
information.
Exterior Lamp
Bulb
Number
Back-up Lamp 7441
License Plate Lamp W5WLL
Rear Turn Signal
Lamp, Taillamp, and
Stoplamp
3057K
Side Marker Lamp 194
For replacement bulbs not listed
here, contact your dealer.