Object detection system messages, Ride control system messages, Object detection system – CHEVROLET 2012 Silverado User Manual

Page 196: Messages -48, Ride control system, 48 instruments and controls

Advertising
background image

Black plate (48,1)

Chevrolet Silverado Owner Manual - 2012

5-48

Instruments and Controls

Object Detection System
Messages

PARK ASST BLOCKED SEE
OWNERS MANUAL

This message displays if there is
something interfering with the park
assist system. See Ultrasonic
Parking Assist on page 9‑72
for
more information.

PARK ASSIST OFF

After the vehicle has been started,
this message displays to remind the
driver that the URPA system has
been turned off. Press the set/reset
button or the trip odometer reset
stem to acknowledge this message
and clear it from the DIC display. To
turn the URPA system back on, see
Ultrasonic Parking Assist on
page 9‑72
.

SERVICE PARK ASSIST

This message displays if there is a
problem with the Ultrasonic Rear
Parking Assist (URPA) system. Do
not use this system to help you
park. See Ultrasonic Parking Assist
on page 9‑72
for more information.
See your dealer for service.

Ride Control System
Messages

SERVICE STABILITRAK

If the vehicle has StabiliTrak and
this message displays, it means
there may be a problem with the
StabiliTrak system. If you see this
message, try to reset the system.
Stop; turn off the engine for at least
15 seconds; then start the engine
again. If this message still comes
on, it means there is a problem. You
should see your dealer for service.
The vehicle is safe to drive;
however, you do not have the
benefit of StabiliTrak, so reduce
your speed and drive accordingly.

SERVICE TRACTION
CONTROL

If the vehicle has StabiliTrak, this
message displays when there is a
problem with the Traction Control
System (TCS). When this message
displays, the system will not limit
wheel spin. Adjust your driving
accordingly. See your dealer for
service. See StabiliTrak

®

System on

page 9‑65 for more information.

STABILITRAK INITIALIZING

If the vehicle has StabiliTrak, this
message may come on if the
StabiliTrak system has not fully
initialized because of road
conditions or the incorrect tire size.
When the StabiliTrak system is fully
initialized, the message will turn off.
See StabiliTrak

®

System on

page 9‑65 for more information.
If this message continues to be
displayed for multiple ignition cycles
and on different road surfaces, see
your dealer for service.

Advertising