CHEVROLET 2012 Silverado User Manual

Page 271

Advertising
background image

Black plate (43,1)

Chevrolet Silverado Owner Manual - 2012

Infotainment System

7-43

The A/V jacks, located on the rear
of the floor console, allow audio or
video signals to be connected from
an auxiliary device such as a
camcorder or a video game unit to
the RSE system. Adapter
connectors or cables (not included)
may be required to connect the
auxiliary device to the A/V jacks.
Refer to the manufacturer’s
instructions for proper usage.

Power for auxiliary devices is not
supplied by the radio system.

To use the auxiliary inputs of the
RSE system, connect an external
auxiliary device to the color-coded
A/V jacks and turn both the auxiliary
device and the video screen power
on. If the video screen is in the DVD
player mode, pressing the AUX
(auxiliary) button on the remote
control switches the video screen
from the DVD player mode to the
auxiliary device. The audio of the
connected source can be listened to

over the speakers by sourcing the
radio to the auxiliary device or by
sourcing the RSA to the Rear Aux
and listening with the wireless
headphones on Channel 2 or with
the wired headphones. See “Using
the Auxiliary Input Jack” under
Auxiliary Devices on page 7‑35 for
more information about changing
the source.

Changing the RSE Video Screen
Settings

The screen display mode (normal,
full, and zoom), screen brightness,
and setup menu language can be
changed from the on screen setup
menu. To change any feature:

1. Press the

z

(display menu)

button on the remote control.

2. Use the remote control

n

,

q

,

p

,

o

(navigation)

arrows and the

r

(enter)

button to use the setup menu.

3. Press the

z

button again to

remove the setup menu from the
screen.

Audio Output

Audio from the DVD player or
auxiliary inputs can be heard
through the following possible
sources:

.

Wireless headphones

.

Vehicle speakers

.

Vehicle-wired headphone jacks
on the RSA system, if the
vehicle has this feature.

The RSE system always transmits
the audio signal to the wireless
headphones, if there is audio
available. See “Headphones” earlier
in this section for more information.

Advertising