CHEVROLET 2012 Silverado - Manual (Page 214)

Black plate (66,1) Chevrolet Silverado Owner Manual - 2012
5-66 Instruments and Controls
. If a switch is set between
the up and down position,
write “Middle.”
The switch settings written
down in Step 2 now
become the button strokes
to be entered into the
Universal Home Remote in
Step 4. Be sure to enter the
switch settings written down
in Step 2, in order from left
to right, into the Universal
Home Remote, when
completing Step 4.
3. From inside your vehicle, first
firmly press all three buttons at
the same time for about
three seconds. Release the
buttons to put the Universal
Home Remote into
programming mode.
A. Left Button (Up, +, or On)
B. Middle Button (Middle, 0,
or Neutral)
C. Right Button
(Down, −, or Off)
4. The indicator lights will blink
slowly. Enter each switch setting
from Step 2 into your vehicle's
Universal Home Remote.
You will have two and
one-half minutes to complete
Step 4. Now press one button on
the Universal Home Remote for
each switch setting as follows:
. If you wrote “Left,” press
the left button (A) in the
vehicle.
. If you wrote “Right,” press
the right button (C) in the
vehicle.
. If you wrote “Middle,” press
the middle button (B) in the
vehicle.