Safety belt reminders, Airbag readiness light – CHEVROLET 2012 Malibu User Manual

Page 112

Advertising
background image

Black plate (12,1)

Chevrolet Malibu Owner Manual - 2012

5-12

Instruments and Controls

Safety Belt Reminders

Driver Safety Belt Reminder
Light

When the engine is started, a chime
sounds for several seconds to
remind a driver to fasten the safety
belt. Unless the driver safety belt is
already buckled.

The safety belt light comes on and
stays on for several seconds, then
flashes for several more.

This chime and light are repeated if
the driver remains unbuckled and
the vehicle is in motion.

If the driver safety belt is buckled,
neither the light nor the chime
comes on.

Passenger Safety Belt
Reminder Light

For vehicles equipped with the
passenger safety belt reminder light,
several seconds after the engine is
started, a chime sounds for several
seconds to remind the front
passenger to buckle their safety
belt. The passenger safety belt light
flashes and then stays on solid until
the belt is buckled. This cycle
continues several times if the
passenger remains or becomes
unbuckled while the vehicle is
moving.

If the passenger safety belt is
buckled, neither the chime nor the
light comes on.

The passenger safety belt reminder
light and chime may turn on if an
object is put on the seat such as a
briefcase, handbag, grocery bag,
laptop, or other electronic device. To
turn off the reminder light and/or
chime, remove the object from the
seat or buckle the safety belt.

Airbag Readiness Light

The system checks the airbag's
electrical system for possible
malfunctions. If the light stays on it
indicates there is an electrical
problem. The system check includes
the airbag sensor(s), passenger
sensing system, the pretensioners,
the airbag modules, the wiring, and
the crash sensing and diagnostic
module. For more information on the
airbag system, see Airbag System
on page 3‑17
.

Advertising