Passenger airbag status indicator, Passenger airbag status, Indicator -13 – CHEVROLET 2012 Malibu User Manual

Page 113

Advertising
background image

Black plate (13,1)

Chevrolet Malibu Owner Manual - 2012

Instruments and Controls

5-13

The airbag readiness light comes on
solid for a few seconds when the
engine is started. If the light does
not come on then, have it fixed
immediately.

{

WARNING

If the airbag readiness light stays
on after the vehicle is started or
comes on while driving, it means
the airbag system might not be
working properly. The airbags in
the vehicle might not inflate in a
crash, or they could even inflate
without a crash. To help avoid
injury, have the vehicle serviced
right away.

If there is a problem with the airbag
system, a Driver Information Center
(DIC) message can also come on.
See Airbag System Messages on
page 5‑28
for more information.

Passenger Airbag Status
Indicator

The vehicle has a passenger
sensing system. See Passenger
Sensing System on page 3‑24
for
important safety information. The
instrument panel has a passenger
airbag status indicator.

United States

Canada and Mexico

When the vehicle is started, the
passenger airbag status indicator
will light ON and OFF, or the symbol
for on and off, for several seconds
as a system check. If you are using
remote start to start the vehicle from
a distance, if equipped, you may not
see the system check. Then, after
several more seconds, the status
indicator will light either ON or OFF,
or either the on or off symbol to let
you know the status of the right front
passenger frontal and seat-mounted
side impact airbags.

If the word ON or the on symbol is
lit on the passenger airbag status
indicator, it means that the right
front passenger frontal airbag and
seat-mounted side impact airbag
are enabled (may inflate).

Advertising