License plate lamp, License plate lamp -29, Vehicle care 10-29 – CHEVROLET 2012 Malibu User Manual
Page 257
Advertising
Black plate (29,1)
Chevrolet Malibu Owner Manual - 2012
Vehicle Care
10-29
2. Remove the push pins holding
the trunk trim (B).
3. Move the trim aside far enough
to gain access to the bulb
assembly (A).
4. Turn the bulb socket (B)
counterclockwise to remove it
from the lamp assembly.
5. Pull the bulb (A) from the
socket (B).
6. Install the new bulb.
7. Reverse Steps 1 through 4 to
reinstall.
License Plate Lamp
To replace the license plate
lamp bulb:
1. Remove the license plate bezel
assembly by turning the two
screws counterclockwise.
2. Turn and pull the license plate
lamp assembly forward through
the fascia opening.
3. Turn the bulb socket
counterclockwise and pull the
bulb straight out of the socket.
Advertising