Compass, Compass -5, Malfunction – CHEVROLET 2012 Corvette User Manual

Page 119

Advertising
background image

Black plate (5,1)

Chevrolet Corvette Owner Manual - 2012

Instruments and Controls

5-5

Windshield Washer

Press and hold the button at the end
of the lever to spray washer fluid on
the windshield. The washer will
spray until the button is released.
The wipers will continue to clear the
window for about six seconds after
the button is released and then stop
or return to your preset speed.

{

WARNING

In freezing weather, do not use
the washer until the windshield is
warmed. Otherwise the washer
fluid can form ice on the
windshield, blocking your vision.

If the fluid in the windshield washer
fluid reservoir is low a message may
appear on the Driver Information
Center (DIC) display, see Washer
Fluid Messages on page 5‑53
.
It will
take 15 seconds after the bottle is
refilled for this message to turn off.

For information on the correct
washer fluid to use, see Washer
Fluid on page 10‑34
and
Recommended Fluids and
Lubricants on page 11‑12
.

Compass

Compass Operation

With the compass feature on, each
time the vehicle is started, the
compass will take a few seconds to
adjust and display the current
compass heading. For example,
NE is displayed for north-east.

Compass Calibration

Press

P

once to turn the compass

display on or off.

If after several seconds the display
does not show a compass heading,
there may be a strong magnetic
field interfering with the compass.
Interference can be caused by a
magnetic antenna mount, note pad
holder, or similar object. If the

letter C or CAL appears in the
compass window, the compass
needs calibration.

Depending on the mirror, in order to
calibrate, CAL must be displayed
in the mirror compass windows.
If CAL is not displayed, press

P

for

several seconds or until CAL is
displayed.

If the compass has map lamps, it
can be placed in calibration mode
by pressing and holding the left map
light button until a C appears on the
compass display.

The mirror compass can be
calibrated by driving the vehicle in
circles at 8 km/h (5 mph) or less until
the display reads a direction.

Compass Variance

The mirror is set to zone eight.
If you do not live in zone eight or
drive out of the area, the compass
variance needs to be changed to
the appropriate zone.

Advertising