Starter switch check, Starter switch check -41 – CHEVROLET 2012 Corvette User Manual

Page 317

Advertising
background image

Black plate (41,1)

Chevrolet Corvette Owner Manual - 2012

Vehicle Care

10-41

How to Check Lubricant

To get an accurate reading, the
vehicle should be on a level
surface.

If the level is below the bottom of
the fill plug hole, some lubricant will
need to be added. Add enough
lubricant to raise the level to the
bottom of the fill plug hole.

What to Use

To add lubricant when the level is
low or to completely refill after
draining, see Recommended Fluids
and Lubricants on page 11‑12
.
Then fill to the bottom of the fill plug
hole with the required lubricant.

Starter Switch Check

{

WARNING

When you are doing this
inspection, the vehicle could
move suddenly. If the vehicle
moves, you or others could be
injured.

1. Before starting this check, be

sure there is enough room
around the vehicle.

2. Firmly apply both the parking

brake and the regular brake.
See Parking Brake on
page 9‑36
.

Do not use the accelerator
pedal, and be ready to turn off
the engine immediately if it
starts.

3. For automatic transmission

vehicles, try to start the engine
in each gear. The vehicle should
start only in P (Park) or
N (Neutral). If the vehicle starts
in any other position, contact
your dealer for service.

For manual transmission
vehicles, put the shift lever in
Neutral, push the clutch pedal
down halfway, and try to start
the engine. The vehicle should
start only when the clutch pedal
is pushed down all the way to
the floor. If the vehicle starts
when the clutch pedal is not
pushed all the way down,
contact your dealer for service.

Advertising