Vehicle messages, Battery voltage and charging messages, Vehicle messages -35 – CHEVROLET 2012 Corvette User Manual

Page 149: Maintenance -7, Vehicle messages -35 battery voltage and, Charging messages -35, Instruments and controls 5-35

Advertising
background image

Black plate (35,1)

Chevrolet Corvette Owner Manual - 2012

Instruments and Controls

5-35

If the ignition is on and the HUD
image cannot be seen, check to
see if:

.

Something is covering the
HUD unit.

.

The HUD dimmer control is
adjusted properly.

.

The HUD image is adjusted to
the proper height.

.

Ambient light is low, in the
direction the vehicle is facing.

.

A fuse is blown. See Fuses and
Circuit Breakers on page 10‑47
.

Keep in mind that the windshield is
part of the HUD system. See
Windshield Replacement on
page 10‑43
.

Vehicle Messages

Messages displayed on the DIC
indicate the status of the vehicle or
some action may be needed to
correct a condition. Multiple
messages may appear one after
another.

The messages that do not require
immediate action can be
acknowledged and cleared by
pressing the RESET button.

The messages that require
immediate action cannot be
cleared until that action is
performed. All messages should be
taken seriously and clearing the
messages does not correct the
problem.

Battery Voltage and
Charging Messages

BATTERY SAVER ACTIVE

This message displays when the
vehicle has detected that the battery
voltage is dropping beyond a
reasonable point. The battery saver
system starts reducing certain
features of the vehicle that you may
be able to notice. At the point that
features are disabled, this message
is displayed. It means that the
vehicle is trying to save the charge
in the battery. Turn off unnecessary
accessories to allow the battery to
recharge.

BATTERY VOLTAGE HIGH

See Voltmeter Gauge on page 5‑16.

BATTERY VOLTAGE LOW

See Voltmeter Gauge on page 5‑16.

Advertising