CHEVROLET 2011 Equinox - Manual (Page 211)

Black plate (55,1) Chevrolet Equinox Owner Manual - 2011
Infotainment System 7-55
. If the system does not
recognize the number, it
confirms the numbers
followed by a tone. If the
number is correct, say
“Yes.” The system responds
“OK, Dialing” and dials the
number. If the number is
not correct, say “No.” The
system will ask for the
number again.
Using the Digit Dial Command
1. Press
b
/
g
.
. For vehicles without a
navigation system, the
system responds “Ready,”
followed by a tone.
. For vehicles with a
navigation system, the
system responds with a
tone. After the tone say
“Hands Free.” The system
responds “Ready,” followed
by a tone.
2. Say “Digit Dial.” The system
responds “Digit dial using
<phone name>, please say the
first digit to dial,” followed by
a tone.
3. Say the digits to be dialed one at
a time. The system repeats back
the digit it heard followed by
a tone.
4. Continue entering digits until the
number to be dialed is complete.
After the whole number has
been entered, say “Dial.” The
system responds “OK, Dialing”
and dials the number.
. If an unwanted number is
recognized by the system,
say “Clear” at any time to
clear the last number.
. To hear all of the numbers
recognized by the system,
say “Verify” at any time.
Using the Call Command
1. Press
b
/
g
.
. For vehicles without a
navigation system, the
system responds “Ready,”
followed by a tone.
. For vehicles with a
navigation system, the
system responds with a
tone. After the tone say
“Hands Free.” The system
responds “Ready,” followed
by a tone.
2. Say “Call.” The system responds
“Call using <phone name>.
Please say the name tag,”
followed by a tone.
3. Say the name tag of the person
to call.
. If the system recognizes
the name tag it responds
“OK, calling, <name tag>”
and dials the number.