Ultrasonic parking assist, Roof rack system, Power outlets – CHEVROLET 2011 Equinox User Manual

Page 29

Advertising
background image

Black plate (23,1)

Chevrolet Equinox Owner Manual - 2011

In Brief

1-23

Ultrasonic Parking Assist

If available, Ultrasonic Rear Parking
Assist (URPA) uses sensors on the
rear bumper to detect objects while
parking the vehicle. URPA comes
on automatically when the shift lever
is moved into R (Reverse) and
operates at speeds less than 8 km/h
(5 mph). URPA uses audio beeps to
provide distance and system
information.

Keep the sensors on the vehicle's
rear bumper clean to ensure proper
operation.

The URPA system can be turned on
and off using the infotainment
system controls. See Vehicle
Personalization on page 5‑30
for
more information.

See Ultrasonic Parking Assist on
page 9‑45
for more information.

Roof Rack System

The roof rack cross rails can be
locked in four positions along the
roof rack side rails. Lift the lever to
release and move the cross rail.
Push the lever down to completely
engage into the side rail holes. Slide
the cross rails back and forth until
the lock pins engage in the holes
and a click is heard.

When the roof rack is not in use,
lock one cross rail at the furthest
forward position and lock the other
cross rail at the furthest rearward
position to reduce wind noise. See
Roof Rack System on page 4‑2.

Power Outlets

The accessory power outlets can
be used to connect electrical
equipment, such as a cell phone
or MP3 player.

There are four accessory power
outlets in the following locations:
below the CD slot, inside the center
console storage, on the rear of the
center console storage, and in the
rear cargo compartment.

To use the outlets, remove the cover
and close when not in use.

See Power Outlets on page 5‑6.

Advertising