CHEVROLET 2010 Equinox - Manual (Page 188)

6-46 Infotainment System
3. Enter the character sequence
then select Call. See “Entering
a Character Sequence” in
Operation on page 6‑7 for
more information.
4. After the call has been placed,
press the MENU/SEL knob and
choose Merge Calls.
5. To add more callers to the
conference call, repeat
Steps 1 through 4. The amount
of callers that can be added are
limited by your wireless service
carrier.
Ending a Call
Press the MENU/SEL knob and
select Hang Up.
Muting a Call
To Mute a Call
Press the MENU/SEL knob and
select Mute Call.
To Cancel Mute
Press the MENU/SEL knob and
select Mute Call.
Dual Tone Multi-Frequency
(DTMF) Tones
The in‐vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu driven
phone system.
1. Press the MENU/SEL knob and
select Enter Number.
2. Enter the character sequence,
see “Entering a Character
Sequence” in Operation on
page 6‑7 for more information.
Bluetooth
(Voice Recognition)
Pairing
A Bluetooth cell phone must be
paired to the Bluetooth system and
then connected to the vehicle before
it can be used. See the cell phone
manufacturers user guide for
Bluetooth functions before pairing
the cell phone. If a Bluetooth phone
is not connected, calls will be made
using OnStar
® Hands‐Free Calling,
if available. Refer to the OnStar
owner's guide for more information.
The pairing process can be started
by using the voice recognition
system or the controls on the
infotainment system.