CHEVROLET 2009 Malibu - Manual (Page 187)

Setting the Clock
Without Date Display
AM/FM Base Radio with a Single CD
Player
To set the time:
1. Turn the ignition key to ACC/ACCESSORY or
ON/RUN. Press O to turn the radio on.
2. Press
H
until the hour begins flashing on the
display. Press
H
a second time and the minute
begins flashing on the display.
3. While either the hour or the minute numbers are
flashing, turn
f
to increase or decrease the time.
4. Press H again until the clock display stops flashing
to set the currently displayed time; otherwise, the
flashing stops after five seconds and the current
time displayed is automatically set.
To change the time default setting from 12 hour to
24 hour, press
H
and then the pushbutton located below
the forward arrow tab. Once the time 12H and 24H are
displayed, press the pushbutton located below the
desired option to select the default. Press
H
again to
apply the selected default, or let the screen time out.
With Date Display
Radio with CD (MP3) and USB Port, and
Radio with Single CD (MP3) Player
To set the time and date:
1. Turn the ignition key to ACC/ACCESSORY or
ON/RUN. Press O to turn the radio on.
2. Press H and the HR, MIN, MM, DD, YYYY (hour,
minute, month, day, and year) displays.
3. Press the softkey located below any one of the tabs
that you want to change.
4. To increase the time or date do one of the following:
• Press the softkey located below the selected tab.
• Press ¨ SEEK, or \ FWD.
• Turn
f
clockwise.
5. To decrease the time or date do one of the
following:
• Press © SEEK or s REV.
• Turn
f
counterclockwise.
The date does not automatically display. To see the date
press
H while the radio is on. The date with display times
out after a few seconds and goes back to the normal
radio and time display.
3-57