CHEVROLET 2009 Malibu - Manual (Page 191)

• To scan preset stations in the selected band, press
and hold © SEEK for four seconds until a double
beep sounds. The radio goes to a stored preset,
plays for a few seconds, then goes to the next stored
preset. Press
© SEEK again to stop scanning preset
stations.
¨ SEEK: Press to seek or scan stations with a strong
signal in the selected band.
• To seek stations, press and release ¨ SEEK to go
to the next station and stay there.
• To scan stations, press and hold ¨ SEEK for a
few seconds until the radio beeps once. The radio
goes to a station, plays for a few seconds, then
goes to the next station. Press
¨ SEEK again to
stop scanning.
• To scan preset stations in the selected band, press
and hold ¨ SEEK for four seconds until a double
beep sounds. The radio goes to a stored preset,
plays for a few seconds, then goes to the next stored
preset. Press
¨ SEEK again to stop scanning preset
stations.
4
(Information): For vehicles with the Radio with CD
(Base), press to switch the display between the radio
station frequency and the time. While the ignition is off,
press
4
to display the time.
For vehicles with XM, MP3, WMA, or RDS features,
press
4 to display additional text information related to the
current FM-RDS or XM station; or CD, MP3, WMA song.
Song title information will be displayed on the top line of
the display while the artist information will be displayed
on the bottom line, it the information is available during
XM, CD, MP3, or WMA playback. When information is not
available, “No Info” displays.
3-61