Removing the flat tire and installing the, Spare tire -79 – CHEVROLET 2009 Malibu User Manual

Page 337

Advertising
background image

3. Extend the handle on the wheel wrench by pressing

the button and pulling on the end of the wrench.
You must do this before using the wheel wrench.

Removing the Flat Tire and
Installing the Spare Tire

1. Do a safety check before proceeding. See Changing

a Flat Tire on page 5-76.

2. If the vehicle has a wheel cover or hubcap that has

plastic wheel nut caps, loosen the plastic nut caps.
You might need to use the wheel wrench to loosen
them. Do not pry off wheel covers or center caps that
have plastic wheel nut caps.

3. Remove the wheel cover or center cap from the

wheel to locate the wheel nuts.

If the vehicle has a wheel cover or hubcap without
plastic wheel nut caps, gently pry on the edge of the
plastic wheel trim to remove it from the wheel to
locate the wheel nuts.

5-79

Advertising