Clarity Cordless Telephone - Manual (Page 13)

type of service.
8. Place handset in the cradle to begin initial
charging.
WALL MOUNTING INSTALLATION
CAUTION:
Disconnect the telephone line cord before
connecting or disconnecting the battery backup in the
wall mount bracket.
The base unit may be mounted on a standard wall
plate.
1. Plug one end of the supplied short modular
telephone line cord into the TEL jack located on the
back of the base of the phone.
2. Insert the plug of the AC adapter into the jack
marked DC 9V 400mA located on the back of the
telephone base.
3. Align the mounting bracket on the back of the
base so that the black rubber feet are towards the
bottom of the phone. Insert the bracket’s tabs into
the slots and secure the bracket by sliding it
upward.
4. Plug the short modular telephone line cord into the
wall plate jack, then align the mounting bracket’s
keyhole slots with the wall plate studs and slide the
13