Clarity Cordless Telephone - Manual (Page 25)

If the handset is in the cradle, simply lift the handset
to answer.
Note:
Refer to BOOST Clarity Power and Volume
Control for information on adjusting volume controls
on Page 15.
Last Number Redial
The last number dialed (up to 32 digits) is stored in
the redial memory until another number is dialed.
To use this feature:
1. Press the TALK button.
2. When you hear the dial tone, press the RD/P
button.
3. The phone will automatically dial for you.
Pause Feature
Programming in a pause will cause the phone to wait
four (4) seconds before dialing additional numbers.
This feature may be used when it is necessary to dial
an access code (9, for example) and wait for a
second dial tone before you can dial an outside
number. Press the RD/P button at the required point
during the memory storage process to program a
pause.
25