Chicago Electric 97677 - Manual (Page 12)

Page 12 SKU 97677 For technical questions, please call 1-800-444-3353.
TROUBLEShOOTInG
Problem Possible Causes Likely Solutions
Vacuum will not
start.
No power at outlet. 1.
Cord not connected. 2.
On/Off switch is not turned On. 3.
Check power at outlet. 1.
Check that cord is plugged in. 2.
Turn On the switch. 3.
When dry
vacuuming, Motor
becomes labored.
Cartridge Filter is clogged or Tank is 1.
full.
Turn off Vacuum, and disconnect the unit from 1.
its electrical outlet. Then clean out Cartridge
Filter and/or Tank.
When wet
vacuuming, unit
automatically stops
vacuuming.
Tank is full of water. 1. Turn off Vacuum, and disconnect the unit from 1.
its electrical outlet. Then empty the Tank of
dirty water.
Suction is poor. Insufficient air flow. 1.
Insufficient air flow. 2.
Clogged Hose and/or accessories. 3.
Inspect the filters. 4.
Adjust Air Flow Adjusting Knob for greater 1.
suction.
Make sure all connections are secure.
2.
Clean out Hose and accessories. 3.
Clean/Replace the filters. 4.
Follow all safety precautions whenever diagnosing or servicing the tool.
Disconnect power supply before service.
PLEASE READ ThE FOLLOWInG CAREFULLY
THE MANUFACTURER AND/OR DISTRIbUTOR HAS PROVIDED THE PARTS LIST AND ASSEMbLy
DIAgRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR
DISTRIbUTOR MAkES ANy REPRESENTATION OR WARRANTy OF ANy kIND TO THE bUyER THAT
HE OR SHE IS qUALIFIED TO MAkE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIbUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD bE
UNDERTAkEN by CERTIFIED AND LICENSED TECHNICIANS, AND NOT by THE bUyER. THE bUyER
ASSUMES ALL RISk AND LIAbILITy ARISINg OUT OF HIS OR HER REPAIRS TO THE ORIgINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISINg OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.