Whirlpool 9700 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A single wash for normal, everyday soiled loads.
(The Energy Guide Label is based on this cycle.)
Cycle time* is about 66 minutes plus the time
needed while the timer delays to heat the water to
140°F (60°C) in the wash (marked t) and, if the
Hi-Temp Option is selected, in the last rinse
(marked tt).
Normal Cycle
A single wash for pre-rinsed or lightly soiled loads.
Cycle time* is about 58 minutes plus the time
needed while the timer delays to heat the water to
140°F (60°C) in the wash (marked t) and, if the
Hi-Temp Option is selected, in the last rinse
(marked ft)-
Low Energy Cycle
Rinse
[____________ Washt
[ Rinse
Rinsett
____
[ Dry
*Cycle time includes heated dry times.
13