The status indicators, Normal add a dish washing – Whirlpool 9700 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

START / FAVORITE

2. Pressing the SET FAVORITE pad during

this 30 seconds will set the cycle and option
combination that is showing on the display
as your favorite cycle. “FAVORITE SET” will
be displayed.

Or you may wait until the display goes
out and:

3. Select your desired cycle by pressing the

CYCLE, OPTIONS, and/or DELAY pads.

4. Press the SET FAVORITE pad. The cycle

combination and “FAVORITE SET" will be
displayed. This is now your favorite cycle.

NOTE: Each step must be completed within 15
seconds of the previous step or the display will go
blank. If the display goes blank, repeat Steps 3
and 4.

To display your favorite cycle:

• From a blank display press the SET FAVORITE

pad The display will show your favorite cycle.

To change your favorite cycle:

• Repeat the above steps 3 through 4.

To start your favorite cycie:

• Press START/FAVORITE.

The dishwasher will immediately start. If a delay is
part of the favorite cycle, the dishwasher will start
the delay countdown.

NOTE: The favorite cycle settings will be lost

during a power failure. Repeat the steps under

“To set your favorite cycle for the first time”

to reset your favorite cycle.

The status indicators

The status indicators let you know what your
dishwasher is doing during a cycle.

The eiectronic display

The electronic display shows:

NORMAL

ADD A DISH

WASHING

i i

MINUTES

G G

' The number of minutes remaining in a cycle. The

actual time remaining in the cycle may be longer

than what's displayed if the dishwasher must

heat water during a cycle. (See “The PAUSE
HEAT indicator” on page 10.)

' The number of delay hours selected.

u

DELAY HRS

Advertising
This manual is related to the following products: