Starting a wash cycle, Stopping the dishwasher – Whirlpool 960 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STARTING YOUR DISHWASHER
Starting a wash cycle
1. Load the dishwasher. See pages 7-10.
2
. Spin the spray arms. They should
turn freely.
3. Add detergent. See page 11.
4. Add rinse agent, if needed. See page 12.
5. Close door firmly until it latches.
6
. Run hot water at the sink nearest the
dishwasher until water is hot.
Turn water off. See page 20.
7. Press a Cycle pad. If desired, press one
or more Option pads. (See
pages 13-15.) The dishwasher
starts filling once you press a
Cycle pad unless you select
the delay wash cycle. You
may press Option pads as the machine
is filling.
The pad indicator glows red when a cycle
or an option is selected.
Stopping the dishwasher
You can stop your dishwasher anytime
during a cycle. All you have to do is:
• Open the door slightly. Wait for any filling
or spraying action to stop before opening
the door all the way. Close door to con
tinue cycle.
OR
• Press Cancel/Drain. Once pressed, a
2-minute drain starts. (See page 14.)