Whirlpool EB21DKXDB01 - Manual (Page 9)

To reinstall shelf:
1. Hold shelf at front and back.
2. Tilt front of shelf up to a 45° angle to track.
3. Insert both rear shelf slides into upper channel
of track.
4. Lower front of shelf to a level position.
NOTE: Make sure both rear shelf slides are securely
in the track before letting go of shelf.
U S I N G Y O U R R E F R I G E R A T O R
Upper channel
of track
Insert rear shelf slides into upper channei of track.
Adjusting the cantilever refrigerator shelves
Adjust the shelves to match the way you use your
refrigerator. Glass shelves are strong enough to hold
bottles, milk, and other heavy food items.
To remove a shelf:
1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lift shelf at back.
4. Pull shelf straight out.
To replace a shelf:
1. Guide the rear shelf hooks into the slots in the shelf
supports on the back liner wall.
2. Tilt front of shelf up until hooks drop into slots.
3. Lower front of shelf to a level position.
To slide shelf out:
• Carefully pull front of shelf toward you.
To slide shelf In:
• Push shelf in until it stops.
NOTE: Glass shelves are heavy. Handle them
carefully.
Removing the meat drawer and cover
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift front of meat drawer and slide meat drawer out
the rest of the way.
3. Replace in reverse order.
To adjust the cover position:
1. Tilt front of cover up.
2. Lift back of cover.
3. Pull cover straight out.
To replace the cover:
1. Guide the cover’s rear hooks into the slots in the
shelf supports on cabinet wall.
2. Tilt cover up at front until the hooks drop into slots.
3. Lower front of cover to a level position
Pull out to the stop, lift the front, and pull again.