Removing the door trim (dispenser area), Adjusting the door bins, Adjusting the door bin glides – Whirlpool EDZZDQ User Manual
Page 10: Adjusting the door bln glides
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R R E F R I G E R A T O R
Removing the door trim (dispenser area)
(on some models)
Remove the trim above the dispenser area
for easier cleaning.
To remove trim:
1. Remove all items from the sheK.
2. Pull straight up at each end of the trim.
To replace trim:
1. Line up each end of the trim above the
trim pocket opening in the door liner wall.
2. Push the trim straight down until it stops.
3. Replace items on the shelf.
Adjusting the door bins
To remove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.
Adjusting the door bin glides
Use the bin/shelf glides to secure odd
shaped Kerns or to separate other items.
1. Grasp glide.
2. Slide glide along bin/track.
NOTE:
Shelf glides cannot be removed.
10