Installing it properly, Leveling it – Whirlpool EDZZDQ User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

B E F O R E U S I N G Y O U R R E F R I G E R A T O R

Installing it properly

1. Allow inch (1.25 cm) space on each

side and at the top of the refrigerator for
ease of installation.

2. If the refrigerator is to be against a wall,

you might want to leave extra space on
the hinge side closest to the wall so the
door can be opened wider.

3. The refrigerator can be flush against the

wall.

4. Make sure ice maker water supply has

been connected. Refer to Installation

Instructions.

]

Leveling it

Your refrigerator has 2 front leveling
screws-one on the right and one on the left.
To adjust one or both of these, follow the
directions below.

1. Remove base grille. (See page 20.)

2. To raise front, turn screw clockwise.

3. To lower front, turn screw counterclock­

wise.

4. Check with level.

5. Replace base grille. (See page 20.)

Right to raise;

Advertising