Whirlpool EDZZDQ - Manual (Page 21)

U S I N G Y O U R R E F R I G E R A T O R
To change light below ice bin:
1. Disconnect refrigerator from power supply.
2. Push in sides of light shield until it snaps
free.
3. Replace bulb with a 40-watt appliance bulb.
4. Replace light shield.
5. Reconnect refrigerator to power supply.
Light
below
ice bin
To change light behind quick freeze
compartment (on some models):
1. Disconnect refrigerator from power
supply.
2. Lift and secure quick freeze compartment
door.
3. Remove light shield by pulling top for­
ward.
4. Replace bulb with a 40-watt appliance
bulb.
5. Replace light shield.
6. Reconnect refrigerator to power supply.
To change dispenser area light:
1. Disconnect refrigerator from power
supply.
2. Reach through dispenser area to remove
bulb.
3. Replace with a heavy-duty 10-watt bulb,
which can be purchased from your
Whirlpool dealer.
4. Reconnect refrigerator to power supply.
NOTE: Not all commercial appliance bulbs
will fit your refrigerator. Be sure to replace a
bulb with one of the same size and shape.
compartment
21