Removing the meat drawer and cover, Adjusting the meat drawer temperature, Adjusting the crisper humidity control – Whirlpool 8ED22DQ User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Adjusting the crisper humidity control

You can control the amount of humidity in
the moisture-sealed crisper.

• Adjust the control to any setting between

LOW and HIGH.

• LOW (open) lets moist air out of the crisper

for best storage of fruits and vegetables
with skins.

• HIGH (closed) keeps moist air in the

crisper for best storage of fresh, leafy
vegetables.

Pull out to the stop, lift

the front and pull again.

Removing the meat drawer and cover

To remove the meat drawer:

1. Slide the meat drawer straight out to

the stop.

2. Lift the front slightly.
3. Slide out the rest of the way.
4. Replace in reverse order.

To remove the cover:

1. Remove meat drawer and crisper.

2. Lift front of cover off supports.
3. Lift cover out by pulling up and out.

To replace the cover:

1. Fit back of cover into notch supports on

walls of refrigerator.

2. Lower front into place.
3. Replace meat drawer and crisper.

Adjusting the meat drawer temperature

Cold air flows against the meat drawer
through an opening between the freezer and
the refrigerator. This helps keep the meat
drawer colder than the rest of the refrigera­
tor for better storage of meats.

Slide the control to let more or less cold

air through.

1 2

Advertising
This manual is related to the following products: