Removing the base grille – Whirlpool 8ED22DQ User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To change light behind quick freeze
compartment (on some models):
1. Disconnect refrigerator from power
supply.
2. Lift and secure quick freeze compartment
door.
3. Remove light shield by pulling top
forward.
4. Replace bulb with a 40-watt appliance
bulb.
5. Replace light shield.
6. Reconnect refrigerator to power supply.
To change dispenser area light:
1. Disconnect refrigerator from power supply.
2. Reach through dispenser area to remove bulb.
3. Replace with a heavy-duty 10-watt bulb,
which can be purchased from your
Whirlpool dealer.
4. Reconnect refrigerator to power supply.
NOTE: Not all appliance bulbs will fit your
refrigerator. Be sure to replace a bulb with
one of the same size and shape.
Light
below
ice bin
Light behind
quick freeze
Dispenser area light
Removing the base grille
To remove the grille:
1. Open both doors.
2. Pull base grille forward to release the
support tabs from the metal clips.
3. Do not remove Tech Sheet fastened
behind the grille.
To replace the grille:
1. Line up grille support tabs with metal
clips.
2. Push firmly to snap into place.
3. Close the doors.
See cleaning instructions for defrost pan and
condenser coils on page 22.
Condenser coils
Metal
clips
Base
grille
Support
' tabs
19