Changing the control settings – Whirlpool 8ED22DQ User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. Give the refrigerator time to cooi down
completely before adding food. This may
take severai hours.
The settings indicated above should be
correct for normal, household refrigerator
usage. The controls are set correctly when
milk or juice is as coid as you like and
when ice cream is firm, if you need to
adjust these settings, see “Changing the
control settings” below.
NOTE: The Automatic Exterior Moisture
control continuously guards against moisture
build-up on the outside of your refrigerator
cabinet. This control does not have to be set
or adjusted.
Changing the control settings
• Adjust the Refrigerator Control first.
• Wait at least 24 hours between adjustments.
• Then adjust the Freezer Control if needed.
If you need to adjust temperatures in
refrigerator or freezer, use the settings listed
in the chart below as a guide.
RECOMMENDED
CONDITION:
REASON:
CONTROL SETTINGS:
Refrigerator
Freezer
Refrigerator
• Door opened often
section
• Large amount of food added
4
A
too warm
• Room temperature too warm
Freezer
• Door opened often
section
• Large amount of food added
3
c
too warm
• Very cold room temperature
(can’t cycle often enough)
Refrigerator
• Controls not set correctly
B
section
too cold
for your conditions
2
Ice not
• Heavy ice usage
made fast
•Very cold room temperature
3
c
enough
(can’t cycle often enough)
Both
• Door opened often
sections
• Large amount of food added
4
B
too warm
•Very warm or very cold room
temperatures