Using the refrigerated shelves <on some models), Using the lower storage gate, Removing the base grille – Whirlpool EV170NX User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

U S I N G Y O U R F R E E Z E R

Using the refrigerated shelves <on some models)

Your freezer is equipped with refrigerated interior
shelves. Packages in direct contact with the
shelves will have the best refrigeration. Fresh,

unfrozen food packages should be stored directly
on the shelves and not on top of already frozen

food packages.

When placing the food packages in your

freezer, please remember

• The cabinet shelves have the best freezing

capability. The door shelves and the bottom of
the cabinet have a slightly higher temperature.

Therefore, packages sensitive to temperature
(meat, poultry, etc.) should not be placed on the
door shelves or the freezer bottom.

• Give the cold air a chance to completely

surround the packages.

Using the lower storage gate

To lower gate:

1. Lift top of gate up slightly to clear supports.

2. Pull gate forward.

To raise gerte:

1. Return gate to upright position.

2. Lift top of gate slightly to clear supports.

3. Lower gate into supports.

Pull top up,
then forward.

Removing the base grille

For Manual-defrost trxjdels: The base grille will
need to be removed when defrosting the freezer.

To remove the grille:

1. Open the door.

2. Pull on both sides of the grille.

To replace the grille:

1. Line up grille support tabs with openings in

freezer cabinet.

2. Push firmly to snap grille into place.

3. Close the door.

Advertising
This manual is related to the following products: