Whirlpool 930 - Manual (Page 14)

S E T T I N G T H E C O N T R O L S
Using Cancel/Drain
Press Cancel/Drain to cancel a cycle or to
clear the indicators.
To cancel a cycle:
• Press Cancel/Drain while the dishwasher
is running to start a 2-minute drain. It will
take a few seconds for the drain to start.
If desired, select a new cycle. (See the
“Changing a cycle or option setting” section.)
• You can press Cancel/Drain again to stop
the drain immediately. Remember to drain
the dishwasher again before starting a
new cycle.
NOTE: A small amount of water remaining
in the dishwasher is normal.
To clear the indicators:
Press Cancel/Drain before starting the
dishwasher to clear all cycle and option
selections.
Selecting cycle options
You can press an Option pad after the
dishwasher starts as long as the cycle is not
past the point that the option is used. For
example, you can press Air Dry anytime
before the Drying indicator glows.
After a wash cycle, the dishwasher
remembers the chosen options and uses the
same options in the next wash cycle unless
new options are selected or the Cancel/
Drain pad is pressed.
High Temp Wash
When High Temp Wash is selected, the
dishwasher heats the water
during the main wash of the Low
Energy/China and Normal cycles.
Heating the water helps improve
washing results. The Pots-N-Pans
cycle automatically uses High Temp Wash.
Air Dry
When Air Dry is selected, the air in the
H
dishwasher is not heated during
the “dry” portion of a cycle.
Using Air Dry helps save
energy, but dishes take longer to
dry and some spotting can occur.
Some items (such as plastics) may need
towel drying. For best drying, use a liquid
rinse agent.
NOTE: The dishwasher automatically
heats the air in the dishwasher during the
“dry” portion of the cycle unless you select
Air Dry.
14