Using the delay wash cycle, Notes – Whirlpool 930 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
S E T T I N G T H E C O N T R O L S
Using the delay wash cycle
Use 4 Hour Delay Start to run the dish
washer during off-peak hours to reduce
energy usage or to reduce daytime heat
buildup in your home.
1. Close door firmly until it latches.
Press 4 Hour Delay Start. The indicator
will glow red.
Press a Cycle button. The Delay Start
countdown begins when you
press the Cycle button. If you
don’t press a Cycle button
within 30 seconds, the Delay
Start indicator turns off.
If desired, press one or more Option
buttons. The 4 Hour Delay
Start indicator stays on until
the wash cycle begins.
NOTES:
• Press 4 Hour Delay Start anytime during
the delay period to start
dishwasher immediately.
• Press Cancel/Drain to cancel the delay
■■■■ cycle. The 4 Hour Delay Start
indicator will turn off. Press new
Cycle and Option buttons.
• You can add items to the load anytime
during the delay countdown. After adding
items, close the door firmly until it latches.
The delay countdown will not continue if
the door is not latched.
16