Removing the ice maker storage bin – Whirlpool ET25DQ User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

U S I N G Y O U R R E F R I G E R A T O R

Removing the ice maker storage bin

Remove, empty and clean the storage bin if;

• the ice dispenser has not, or will not, be

used for a week or more.

• a power failure causes ice in the bin to

melt and freeze together.

• the ice dispenser is not used regularly.

To remove ice bin:

1. Pull the covering panel out from the

bottom and slide it to the rear.

2. Lift the signal arm so it clicks into the OFF

(up) position. Ice can still be dispensed,
but no more can be made.

■ OFF

3

}-

7

3. Lift the rear of the storage bin straight up

and pull out.

NOTE: Storage bin is heavy when filled

with ice. Be careful when removing it.

4. Empty the ice bin. Use hot or warm water

to melt the ice if necessary. Never use
anything sharp to break up ice in the
bin. This can damage the bin and dis­
penser mechanism.

5. Wash with mild detergent. Rinse well. Do

not use harsh or abrasive cleaners or

solvents.

6. When replacing the bin, make sure it is

pushed in all the way. Then push the

signal atm down to the ON position to

restart ice production.

15

Advertising
This manual is related to the following products: