The water dispenser, The dispenser light – Whirlpool ET25DQ User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R R E F R I G E R A T O R
The water dispenser
Chilled water comes from a tank behind the
meat drawer. It holds approximately
1 quart (1 L).
When the refrigerator is first hooked up,
press the water dispenser bar with a glass or
jar until you draw and discard 2 or 3 quarts
(1.9 to 2.8 L). Please allow about 30 seconds
to clear the air from the system and for the
water to appear. The water you draw and
discard rinses the tank and pipes. Allow
several hours to chill a new tankful.
NOTE: The small tray beneath the dispenser
is designed to evaporate small spills. There is
no drain in this tray. Do not pour water into it.
To dispense water:
1. Press a sturdy glass against the water
dispenser bar.
2. Remove the glass to stop dispensing.
NOTE: Dispense enough water every week to
maintain a fresh supply.
The dispenser light
To turn on night iight, slide dispenser LIGHT
switch to the left. To replace bulb, reach
through front of dispenser area. Replace bulb
with a 10-watt heavy-duty bulb.
WATER LIGHT
a D
17