Installation instructions – GE 500A436P006 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
installation instructions
3J RECOIMiMECTiiMG GAS
Listed connector ANSI Z21.24 / CSA 6.10
Note: The connector and fittings are designed for use only
on the original installation and are not to be reused for
another appliance or at another location. Keep flare end of
adaptor free of grease, oil and thread sealant.
Caution: Use adapters as shown. Connector nuts must not
be connected directly to pipe threads.
TO THE ADAPTER AND
DRYER GAS INLET.
4 LEAKIEST
A
WARNING - NEVER USE AN OPEN
FLAME TO TEST FOR GAS LEAKS.
OPEN
GAS VALVE
Check all connections for leaks with soapy solution or equivalent.
Apply soap solution.
Leak test solution must not contain ammo
nia which could cause damage to the brass fittings.
If leaks are
found, close valve, retighten the joint, and repeat the soap test.