Dutchwest – Vermont Casting 2463 User Manual
Page 13
13
Dutchwest
7001219
Distance from Center of Flue Collar to Wall in Top-Exit Installations
Dutchwest Convection Heaters equipped with rear heat shields
NOTE: These are not clearance distances. These measurements indicate where the centerline of the flue collar will be for
various installations. Measurements are from the centerline of the flue collar to the wall, not the wall protector.
ST427
dutchwest
flue centerline
6/30/00 djt
A
B
C
E
D
F
ST427
Unprotected Surfaces
Protected Surfaces
Side (A)
Rear (B)
Corner (C)
Side (A)
Rear (B)
Corner (C)
Double-wall
33”
18”
25”
23”
10”
15”
Chimney Connector
(838 mm)
(457 mm)
(635 mm)
(584 mm)
(254 mm)
(381 mm)
Single-wall connector
33”
13”
22”
23”
11”
15”
connector h.s.
(838 mm)
(330 mm)
(559 mm)
(584 mm)
(279 mm)
(381 mm)
Single-wall connector
33”
23”
25”
23”
13”
17”
no heat shields
(838 mm)
(584 mm)
(635 mm)
(584 mm)
(330 mm)
(432 mm)
Heater Installed with
Rear Heat Shield and: