Cisco 1751 - Manual (Page 39)

2-11
Cisco 1751 Router Hardware Installation Guide
78-11258-04
Chapter 2 Installation
Optional Installation Steps
Step 2 Use the console adapter to connect the other end of the cable to the terminal or
PC. If your terminal or PC has a console port that does not fit the adapter included
with the router, you must provide the correct adapter for that port.
Figure 2-5 Connecting the Console Cable to the Router
Connecting a Modem
When a modem is connected to the auxiliary port, a remote user can dial into the
router and configure it. You can use the light blue console cable that came in the
accessory kit. If you are using the light blue cable with the console port, you can
use any crossover RJ-45-to-RJ-45 cable.
+5, + 12, -1 2 VDC
CONSOLE
AUX
Model Cisco 1750
10/100 ETHERNET
SEE M ANU AL B EFOR E IN STAL LATIO N
VIC
2FXO
PVDM O K
MOD O K
SLOT 1
SLOT 2 O K
FDX
SLOT 0 O K
SLOT 1 O K
100 LINK
SLOT 2
THIS S LOT A CCEP TS O NLY V OICE IN TERFA CE C ARDS
THIS S LOT ACCE PTS ONLY VOIC E INTER FACE CARD S
SLOT 0 1
IN USE
0
IN USE
SEE M ANU AL B EFOR E IN STAL LATIO N
VIC
2FXS
1
IN USE
0
IN USE
46567
Console port Light blue
console cable
To PC or terminal