Cisco 1751 User Manual
Page 45
3-3
Cisco 1751 Router Hardware Installation Guide
78-11258-04
Chapter 3
Troubleshooting
Recovering a Lost Password
Image text-base: 0x800080DC, data-base: 0x80B7D7A0
ROM: System Bootstrap, Version 12.1(5r)T1, RELEASE SOFTWARE (fc1)
ROM: C1700 Software (C1700-SV3Y7-M), Version 12.1(5)XA, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
Victrola_3B uptime is 23 hours, 54 minutes
System returned to ROM by power-on
Running default software
cisco 1751 (MPC860) processor (revision 0x5947) with 49152K/16384K
bytes of memory.
Processor board ID JAB30343106 (4266066989), with hardware revision
0000
M860 processor: part number 5, mask 1
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
6 Voice FXS interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x0
Step 5
Record the setting of the configuration register. It is usually 0x0.
Step 6
Record the break setting.
•
Break enabled—bit 8 is set to 0.
•
Break disabled (default setting)—bit 8 is set to 1.