Audience and scope, Organization – Cisco 1751 User Manual
Page 10
About This Guide
Audience and Scope
x
Cisco 1751 Router Hardware Installation Guide
78-11258-04
Audience and Scope
This guide is for users who have some experience installing and maintaining
networking hardware. We assume that Cisco 1751 router users are familiar with
the terminology and concepts of local Ethernet and wide-area networking.
This guide describes the functional and physical features of the Cisco 1751 router
and provides installation procedures, troubleshooting information, technical
specifications, and cable and connector guidelines and specifications.
Organization
This guide is organized as follows:
•
Chapter 1, “Cisco 1751 Router Overview,”
describes the router features,
front-panel LEDs, rear-panel LEDs, and connectors.
•
describes how to install the router by connecting
cables, power, and install WAN interface cards (WICs) and voice interface
cards (VICs).
•
describes some problems that you might have
with the router and how to solve these problems.
•
Appendix A, “Technical Specifications,”
lists the physical characteristics,
environmental requirements, and power specifications for the router.
•
Appendix B, “Cabling Specifications,”
lists the physical characteristics of the
cables and connectors used with the router.
•
Appendix C, “Installing and Upgrading Memory and Packet Voice Data
Modules,”
describes how to install or upgrade memory or data modules in
your router.
•
Appendix D, “Installing the Virtual Private Network Module,”
describes how
to install the Virtual Private Network (VPN) module in the router.
•
Appendix E, “Installing the Echo Canceler Expansion Modules on Cisco
Interface Cards,”
provides information about the echo canceler expansion
modules that are available for use on the 1-port RJ-48 T1/E1 multiflex trunk
(VWIC2-1MFT-T1/E1), and on the 2-port RJ-48 T1/E1 multiflex trunk
(VWIC2-2MFT-T1/E1) interface cards.