Using the smface elements – GE ELECTRONIC TOUCH CONTROL PP980 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
§
*
I
«/a
Using the smface elements.
Fault Code
("F" and a number in the display!
If an error occurs in the control
operation, a. fault code will flash “F”
with a number in the
nd the
control will produce an audible sound.
To correct:
|~^ Touch the
CONTROL LOCK
pad to
reset the contiol.
Attempt to set the control to the
desiied rooking setting.
If the fault rode is not cleared, allow
the cooktop to cool rompleteh’.
6
,After cooling, touch the
CONTROL
LOCK
pad again to reset the conti ol.
Again attempt to set the control to
the desired cooking setting.
If the fault code is still not cleared,
turn off the cooktop jjower at the
circuit breaker or fuse box for one
minute.
If the fault code reappears, call for
senice.
S’
•S
ft
ft
ft
CO
■ft
ft
ft
I
c2
5