2nd rinse, Cycle signal, Wash/rinse temp – Kenmore 110.4646 User Manual

Page 17: Auto temp control

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

2nd Rinse

A second rinse can be used to aid in the removal of detergent or

bleach residue from garments. This option provides an additional
rinse with the same water temperature as the Normal rinse.

Cycle Signal

This signal is helpful when you are removing items from the

washer as soon as it stops. Select ON or OFF.

Preset cycle settings of Water Temperature, Spin Speed, and
Rinse Options can be changed. You can change a modifier after
starting a cycle anytime before the selected Modifier begins. Not
all Modifiers are available with all options and cycles.

Auto Temp Contfol

O Hot/Cold

Warm rinses leave the loads dryer than cold rinses. Warm rinses
increase wrinkling. In cold climates, a warm rinse makes the load
more comfortable to handle. Cold rinses save energy.

Temperature Guide

Wash Water Temperature

Suggested Fabrics

HOT

Whites and pastels

Heavy soils

WARM

Bright colors

Moderate to light soils

COLD

Colors that bleed or fade

Light soils

High

p Warm/ Warrrr

M ediu m L

p Warm/ Colti

Low

О СоМ/ Cold

o o

Spin Wash/ Rinse

Speed Temp

To change the spin speed, select the SPIN SPEED button
until the desired setting illuminates.

To change the water temperature, select the WASH/RINSE
TEMP button until the desired setting illuminates.

Wash/Rinse Temp

In wash water temperatures colder than 60°F (15.6°C),
detergents do not dissolve well. Soils may be difficult to remove.

Auto Temp Control
АТС (Auto Temp Control) electronically senses and maintains a
uniform water temperature. АТС regulates incoming hot and cold
water. The АТС is automatically turned ON when a cycle is
selected. See Preset Cycle Settings table in “Cycles.”

■ АТС ensures consistent cleaning.

■ АТС works for the wash temperature with Warm/Warm,

Warm/Cold, and Cold/Cold settings.

■ АТС works for the rinse temperature with the Warm/Warm

setting.

■ The Cold rinse temperatures depend on the cold water at

your faucet.

Select a water temperature based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.

Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these
washer cycles.

CYCLE

SUGGESTED LOAD TYPE

AVAILABLE CPTICNS

Delay Start 2nd Rinse Cycle Signal

Whitest Whites

Soiled white fabrics

Heavy Duty

Heavily soiled underwear, towels, shirts, etc., made of cotton

Norma l/Casual

Normally soiled blouses, shirts, overalls, etc., made of

polyester, nylon, cotton, linen, or cotton blends

Express Wash

Small loads of 2-3 lightly soiled cotton, polyester, nylon, and
cotton blends.

Delicate

Curtains and delicate clothing, dresses, skirts, shirts and
blouses

Rinse & Spin

All loads

Drain & Spin

All loads

17

Advertising
This manual is related to the following products: